The HEADS-UP STABILIZER™, which has
been scientifically
proven to REDUCE the possibilities of head and neck injuries, now
offers a CONCUSSION WARNING SENSOR to ALERT
the parent, coach or
trainer to know that a player might have sustained a concussion.
The
HEADS-UP
STABILIZER™
CONCUSSION WARNING SENSOR
is a
NEW
and revolutionary detection device with a liquid warning
light that you simply attach to the front of your football face mask.
The
STABILIZER™ CONCUSSION WARNING SENSOR
has a pre-determined liquid indicator that turns
RED indicating that a hit to the
players head was potentially strong enough to cause a concussion, it
DOES NOT
indicate a concussion.
If the liquid turns RED
immediately
remove the player from play
and perform a basic concussion test.
$19.99 ea.
Will ship within 24 to 48 hrs.
(Recommended
for ages 14 and younger)
|
The STABILIZER™
CONCUSSION WARNING SENSOR
PROVIDES 360 degree
IMPACT DETECTION
COVERAGE
|
|
If the TOP side liquid turns RED...
Indicates that a hit or blow to the helmet
was located on the LEFT FRONT, LEFT
SIDE, or BACK LEFT
of the helmet and
strong enough to potentially cause a
concussion.
REMOVE
PLAYER IMMEDIATELY
|
If BOTH liquids turns RED... Indicates
that a hit or blow to the helmet was located on the FACE MASK, FOREHEAD, or BACK CENTER
of the helmet and strong enough
to potentially cause a concussion.
REMOVE
PLAYER IMMEDIATELY
|
If the RIGHT side liquid turns RED...
Indicates that a hit or blow to the helmet
was located on the RIGHT FRONT, RIGHT
SIDE, or BACK RIGHT of the helmet and strong enough to
potentially cause a concussion.
REMOVE
PLAYER IMMEDIATELY
|
The
STABILIZER™
CONCUSSION WARNING SENSOR
is a single hit detection device.
Once
the liquid turns
RED,
remove the sensor and throw it away, then attach a new sensor before
allowing
the player to re-enter play.
WARNING
The STABILIZER™
CONCUSSION WARNING SENSOR does no indicate a concussion
or lack of
a concussion if you suspect and/or if there is any type of
indication of head
trauma the individual
should be evaluated by a licensed professional.
What is the STABILIZER™
CONCUSSION
WARNING SENSOR?
- The STABILIZER™
CONCUSSION
WARNING SENSOR
is a device that detects impact.
- The STABILIZER™
CONCUSSION
WARNING SENSOR
is a device that contains a tube filled with red liquid held
in suspension. When The STABILIZER™
CONCUSSION
WARNING SENSOR
is subjected to
an impact exceeding a specified G-level, the shock disrupts the surface
tension of the liquid, releasing the highly visible red dye into the
length of the tube creating a permanent and immediate indication that
the impact was strong enough to potentially cause a concussion.
- Once activated, the The STABILIZER™
CONCUSSION
WARNING SENSOR cannot
be reset.
- The STABILIZER™
CONCUSSION
WARNING SENSOR
provides 360 degree impact detection.
- The STABILIZER™
CONCUSSION
WARNING SENSOR
is unaffected by moisture or adverse temperatures and once it turns red
it cannot be reset.
- The STABILIZER™
CONCUSSION
WARNING SENSOR has a
tamper-proof design which prevents concealment of activation
without obvious evidence of interference.
- The STABILIZER™
CONCUSSION
WARNING SENSOR is made from
polycarbonate, the same material used in the manufacturing of hockey
helmets.
ATTACHING
The STABILIZER™
CONCUSSION WARNING SENSOR
Using a phillips screw
driver simply
unscrew the screws that attach the facemask
to the helmet.
|
Line up the rectangle slots
in the Stabilizer Concussion Sensor with the screw
holes in the helmet.
|
Screw the screws back thru
the screw
hole brackets on the facemask and
back into the helmet to secure.
|
(Attachment
of the Stabilizer Concussion Warning
Sensor takes less then 2 minutes)
WARNING
The STABILIZER™
CONCUSSION WARNING SENSOR does no indicate a concussion or lack of
a concussion
if you suspect or if there is any type of indication of head
trauma the individual should be evaluated by a licensed professional.
- If any part of the sensor has turned RED it must
be
replaced.
- Do NOT throw or drop your
helmet as this my cause the sensor to
activate.
- Do NOT head butt another
player as this may cause the sensor to
activate.
- Do NOT hit or strike the
sensor directly as this may cause the
indicator to activate.
- This sensor is an indicator ONLY
as is designe to indicate when a
specific G force impact is reached.
Marketing
website